|
EUR
99,00
/per pcs.
incl. 20% VAT. |
In stock.
| Among the stainless PM steels with high wear resistance, Elmax is, for us, the well-balanced all-rounder. |
Elmax steel from Uddeholm is a high-alloyed PM chromium-vanadium steel.
Laser-cut steel blank or saw-cut
Properties
Recommended applications
Chemical composition
C: 1,70% | Si: 0,80% | Mn: 0,30% | Cr: 18% | Mo: 1% | V: 3%
Our "Elmax steel" heat treatment recommendation:
Hardening:
Annealing: Hold for 2 hours at 980°C, cool slowly to 850°C and hold for 10 hours, then cool slowly.
Stress relieving: Hold for 2 hours at 650°C, then allow to cool slowly.
Finish
rolled & annealed
Swedish production
Edges may be sharp – risk of cuts! Always wear appropriate protective equipment when working: gloves, safety glasses, and a dust mask. Store in a dry place to prevent corrosion. Not suitable for children – not a toy!
