ZDI INOX - wild damascus

Stainless damascus steel from Zladinox with the "Wild" pattern, 300 layers.

Properties

• High hardness
• Good wear resistance
• Corrosion resistant
• Very high toughness
• Good polishability
• High sharpness
• Easy to work & sharpen

Chemical composition

Component A: 95X18
Component B: 40X10C2M

Chemical mixed analysis

• C: 0,68%
• Cr: 13,4%
• Mo: 0,4%
• Ni: 0,3%
• Si: 1,1%
• V: 0,1%

Heat treatment / ZDI INOX hardening

• Hardening: 1070°C (air)
• Tempering: 2 hours at 180°C
• Hardness: ~60 HRC

Etching recommendation

• Mirror polish before etching
• Etch for 3-5 minutes in 33% hydrochloric acid (acid should be approx. 60-70°C)
• Lightly polish again with fine polishing paste (e.g. Dialux Blue)