Image selection
|
EUR
14,90
/per piece
incl. 20% VAT. |
In stock.
| Extreme alloys such as Rex121, K390, M398, S110V are barely, if at all, grindable with standard abrasives. This is where the special diamond sandpaper comes into play, allowing even these alloys to be nicely finished. |
Special diamond sandpaper for knife making.
The grits are somewhat finer than conventional abrasives, so we always recommend starting with grit 150.
After use, simply wash with water and allow to dry.
The sanding base should be soft or medium-hard, e.g., rubber.
Sand only with light to moderate pressure, and water should be used.
Size: approx. 230x40mm
