Image selection
|
EUR
16,50
/per pcs.
incl. 20% VAT. |
In stock.
| If an order includes hardening, we will wait to ship until the spring(s) have arrived and been hardened. |
Folding knife spring hardening, the spring is tempered in the high-temperature range to achieve the required spring hardness.
Our recommended spring material for folding knives (e.g. backlock):
Please label clearly (write the steel type on the spring with a marker) and also include a note with: address, order number, steel type, and which spring should be measured for individual HRC testing, if applicable.
Hardening is performed in protective gas, carbon steel in furnace atmosphere. The HRC value is marked on the spring with a marker.
During hardening, blanks may warp; we will attempt to straighten them, but in extremely rare cases the blank may break. We do not assume liability for warping or breakage during hardening.
Messerschmiede Gobec OG
Weinserstraße 42, 3681 Hofamt Priel, Österreich
support@gobec.at
