hardened hunting knife blank made from Böhler S290 - 69 HRC

Hunting knife blade made from Böhler S290 microclean PM, hardened and ground.
Various holes for handle assembly with 2 or 3 pin handle scales or optionally with bolsters.

• Hardened to a tested 69 HRC (±1 HRC)
  • Each blank is individually hardness tested, with the value marked on the blank
• Flat grind, ground to approximately 0,3 - 0,4mm
  • Surface finish approx. grit K320
• Handle attachment with 4mm hole diameter, for bolsters 3mm
  • Ideal for our screw rivets with 5mm head
• Tang
• Low corrosion resistance, not stainless

The surface still has the oxide layer from protective gas hardening.
Finishing should be done wet with diamond sandpaper (alternatively silicon carbide).

Blade thickness: ~3,5mm | Blank length: ~225mm | Blade length: ~110mm,
Blade height: ~31mm tapering towards the tip | Widest part of the blank: ~37mm

As the blade blanks are handmade, the contour and dimensions may differ slightly from the product image & description.

Steel information: Böhler S290 microclean (high-performance HSS)