|
EUR
99,00
/per pcs.
incl. 20% VAT. |
In stock.
| If you are looking for higher wear resistance without sacrificing too much toughness, Elmax is an excellent choice. For us, among the highly alloyed stainless PM steel grades, it is an all-rounder with a very well-balanced profile. |
Elmax steel from Uddeholm is a highly alloyed PM chromium-vanadium steel.
Properties
Recommended applications
Chemical composition
C: 1,70% | Si: 0,80% | Mn: 0,30% | Cr: 18% | Mo: 1% | V: 3%
Our "Elmax steel" heat treatment recommendation:
Hardening:
Annealing: Hold for 2 hours at 980°C, cool slowly to 850°C and hold for 10 hours, then cool slowly.
Stress relieving: Hold for 2 hours at 650°C, then allow to cool slowly.
Finish
Laser cut, rolled & annealed
Swedish production
Edges may be sharp – risk of cuts! Always wear appropriate protective equipment when working: gloves, safety glasses, and a dust mask. Store in a dry place to prevent corrosion. Not suitable for children – not a toy!
